TK series three phase synchronous motor is mainly a synchronous motor for air compressor. It is usually used in chemical fertilizer, refrigeration and other industries, and it can also drive the machinery equipment such as fan and water pump. Especially when the speed is lower than 600r/min, its performance is obviously superior to the asynchronous motor with the same speed. It has a superior power factor, high efficiency, high stability and high overload capacity, and has the performance of the speed without the change of the load.
As for technical requirement of this series of motors, in addition to the specification of special technical specification of the product, other requirements comply with China National Standard GB755<Basic technical requirement of rotating motor>and IEC standard.
The mechanical dimension and tolerance for each part of this series of motors comply with China National standard GB1889-1804 and ISO standard.
Parameter of TK Series three-phase synchronous motor
l Power range:200-5000kw
l Speed range:200-1000rpm
l Voltage range:380-10000v
l Insulation class: F
Excitation: Static thyristor or other excitation modes.
l Protection class: IP00,IP20,IP21,IP23,IP44,IP54
l Construction typys: IM7311,IM5710
l Cooling types:IC01 etc.
T series of synchronous motors can be made into TF TK TDMK TZ TL series. TF:TF TFW are synchronous excitation alternator, TK;This series synchronous motor mainly design for compressors. TDMK;This series motor specialize design for large size ball mill. TZ:specialize for mill machine. and TL are vertical mounting synchronous motor. These series of motors have high operating efficiency, good material, perfect manufacture, stable performance and revolution does not change with load variation. As for technical requirement of this series of motors, in addition to the specification of special technical specification of the product, other requirements comply with China National Standard GB755 The mechanical dimension and tolerance for each part of this series of motors comply with China National standard GB1889-1804 and ISO standard. The protection grade for case of this series of motors is IP00,IP20,IP21,IP23 and IP44 in accordance with GB/T4942.1 and IEC 34-5 The way of cooling for this series of motors is IC01 IC401,IC27,IC37,IC81W and IC91 in accordance with standard of GB/T1993 and IEC60034-6 The basic installation mode for this series of motors complies with the specification of GB997 and IEC60034-7 |
Series TK is mainly used to drive reciprocating air compressor, and can also be used to drive water pump, fan and other general mechanical equipment.
|