The synchronous motors produced by our company are mainly divided into TK (T) medium and large synchronous motor series for air compressors, T (TKS) (TKK) medium and large four-pole, six-pole, eight-pole synchronous motor series, and TDMK large-scale synchronous motor series. TXZ inclined synchronous motor series, TL vertical medium and large synchronous motor series, etc., have a complete range of power from 200kW to 10000kW, speed from 150r/min to 1500r/min, and voltage from 380V to 13800V. There are horizontal, vertical and inclined installation methods. The rotor structure has salient poles and hidden poles. The product has the advantages of advanced design technology, reasonable structure, high insulation strength, good electrical performance, reliable operation, convenient installation and maintenance, etc. The product has undergone strict electrical inspection and complete machine test before leaving the factory, and all performance indicators are guaranteed.
1. TK series three-phase synchronous motors are mainly synchronous motors for air compressors. They are generally used in fertilizer, refrigeration and other industries. They can also drive fans, pumps and other mechanical equipment. Especially when the speed is lower than 600r/min, its performance is significantly better than the asynchronous motor of the same speed. It has advanced power factor (which can improve the power factor of the grid), high efficiency, high stability and high overload capacity, and has the ability to rotate The performance of load changes.
This series of synchronous motors conform to the national standards GB755 "Basic Technical Requirements for Rotating Electrical Machines", GB14711 "General Safety Requirements for Rotating Electrical Machines", JB/T8667.1 "Technical Conditions for Large Three-phase Synchronous Motors TK Series", etc., and also follow the corresponding IEC standards .
The motor is allowed to start at full voltage. If the power grid does not allow full voltage to start, a reduced voltage start is allowed. At this time, the starting current multiples decrease in proportion to the terminal voltage, and the starting torque decreases as the square of the terminal voltage.
2. T(KS) (TKK) series of medium and large four-pole, six-pole, eight-pole synchronous motors
This series of synchronous motors are widely used to drive large-scale fans, pumps, compressors and other working machinery. Due to the large power of this type of working machinery, it meets the requirements of high power supply quality to the power grid, large overload multiples, and high operating efficiency. The power factor of the motor is generally 0.9, and the rated frequency is 50Hz. This type of motor with other parameters can also be produced.
This series of synchronous motors conform to the national standards GB755 "Basic Technical Requirements for Rotating Electrical Machines", GB14711 "General Safety Requirements for Rotating Electrical Machines", JB/T2224 "Technical Conditions for Large AC Three-phase Synchronous Motors", etc., and also follow the corresponding IEC standards.
The motor is allowed to start at full voltage. If the power grid does not allow full voltage to start, a reduced voltage start is allowed. At this time, the starting current multiples decrease in proportion to the terminal voltage, and the starting torque decreases as the square of the terminal voltage.
Chinese
Deutsch
Espanol
Francais
Italiano
Portugues
Japanese
Korean
Arabic
Russian