Product name : CHINA FACTORY CENTRIFUGAL SELF-PRIMING PUMP JET DP WITH BUILT-IN EJECTOR, JET SELF-PRIMING FROM CHINA FACTORY, JETDP SURFACE PUMP FROM CHINA, JETDP PUMP OF CHINESE MANUFACTURE
Product No. : 20205121608
Details:
Pump
>> Pump Body: cast iron & support under special anti-rust treatment
>> Impeller: stainless steel impeller, brass impeller, ppo impeller
>> Mechnical Seal: carbon / ceramic / Stainless Steel
>> Diffuser: PPO/ABS
Motor
>> Bulit-in thermal protector for single phase motor
>> Motor with copper winding
>> Motor Housing: Steel-plate, Aluminum alloy
>> AISI 304 shaft or 45# carbon steel
>> Insulation: f
>> Protection: IP44, ip54 optional
Working Range
>> Liquid: clean liquids without suspended solids, non-aggressive
>> Liquid temperature: up to +40ºC
>> Ambient temperature up to +40ºC
>> Max. working pressure 10bar
>> Continous service S1
JET-DP Self-priming deep well pumps
1. Self-priming: For the first time using, the entire pump chamber should be filled with water.
2. Booster: Stable and powerful pressure is controlled by pressure sensor and flow sensor.
Besides, thermal protector in motor will interrupt current when motor overheats.
TECHINICAL DATA AT 220-240V/50HZ
Note: 110V/60HZ, 115V/60HZ, 127V/60HZ, 110/220V/60HZ, 380V/50HZ ets. Models are available on request.
>> Pump Body: cast iron & support under special anti-rust treatment
>> Impeller: stainless steel impeller, brass impeller, ppo impeller
>> Mechnical Seal: carbon / ceramic / Stainless Steel
>> Diffuser: PPO/ABS
Motor
>> Bulit-in thermal protector for single phase motor
>> Motor with copper winding
>> Motor Housing: Steel-plate, Aluminum alloy
>> AISI 304 shaft or 45# carbon steel
>> Insulation: f
>> Protection: IP44, ip54 optional
Working Range
>> Liquid: clean liquids without suspended solids, non-aggressive
>> Liquid temperature: up to +40ºC
>> Ambient temperature up to +40ºC
>> Max. working pressure 10bar
>> Continous service S1
JET-DP Self-priming deep well pumps
1. Self-priming: For the first time using, the entire pump chamber should be filled with water.
2. Booster: Stable and powerful pressure is controlled by pressure sensor and flow sensor.
Besides, thermal protector in motor will interrupt current when motor overheats.
TECHINICAL DATA AT 220-240V/50HZ
MODEL | POWER | MAX.FLOW | MAX.HEAD | MAX.SUCT | INLET/OUTLET | GW | PACKING DIMENSION(MM) | |
kW | HP | (l/min) | (M) | (M) | (inch) | (kgs) | ||
JETDP-370 | 0.37 | 1/2 | 25 | 25 | 15 | 1.25" x 1" | 15 | 400*300*230 |
JETDP-505 | 0.55 | 3/4 | 30 | 30 | 20 | 1.25" x 1" | 16.5 | 400*300*230 |
JETDP-750 | 0.75 | 1 | 35 | 35 | 25 | 1.25" x 1" | 17 | 400*300*230 |
JETDP-1100 | 1.1 | 1.5 | 40 | 55 | 20 | 1.25" x 1" | 26 | 535*250*300 |
JETDP-1500 | 1.5 | 2 | 45 | 65 | 25 | 1.25" x 1" | 28 | 535*250*300 |
Related Products: