CHINA FACTORY KCB SERIES CONVENTIONAL GEAR OIL PUMP (STAINLESS STEEL, BOOSTER PUMP, TRANSPORTING, PUMPING, FUEL INJECTION PUMP, FOR TRANSPORTING AND UNLOADING OIL WITH HIGH FLOW IN OIL FIELDS, OIL DEPOTS, PORTS, TERMINALS, SHIPS

Product name : CHINA FACTORY KCB SERIES CONVENTIONAL GEAR OIL PUMP (STAINLESS STEEL, BOOSTER PUMP, TRANSPORTING, PUMPING, FUEL INJECTION PUMP, FOR TRANSPORTING AND UNLOADING OIL WITH HIGH FLOW IN OIL FIELDS, OIL DEPOTS, PORTS, TERMINALS, SHIPS

Product No. : 20221793650

←[Previous Product] [Next Product]→

Online Inquiry

Email Us

Details:

KCB series stainless steel gear pumps are mainly composed of gears, shafts, pump bodies, safety valves, and shaft end seals. The gear is heat-treated to have high hardness and strength, and is installed in a replaceable bushing to operate together with the shaft. The lubrication of all parts in the pump is automatically achieved by using the output medium when the pump is working.

　KCB type stainless steel gear pump has a reasonably designed oil drain and oil return tank, which is the smallest torque force that the gear can withstand during work, so the bearing load is small, the wear is small, and the pump efficiency is high.

　KCB series stainless steel gear pumps are equipped with a safety valve for overload protection. The full return pressure of the safety valve is 1.5 times the rated discharge pressure of the pump, and it can also be adjusted according to actual needs within the allowable discharge pressure range. However, note that this safety valve cannot be used as a pressure reducing valve for a long time, and can be installed separately on the pipeline when needed.

KCB series stainless steel gear pump use

　　Stainless steel gear pumps are mainly used to transport lubricating oil in lubrication systems in various machinery and equipment. They are suitable for conveying lubricating oils with a viscosity of 5×10-6～1.5×10-3m2/s (5-1500cSt) and a temperature below 300℃.

　KCB series stainless steel gear pumps can transport non-lubricating oils, beverages, and low-corrosive liquids. Equipped with copper gears, it can transport low internal point liquids, such as gasoline, benzene, etc. In addition to ordinary motors, this series of stainless steel pumps can also be equipped with explosion-proof motors of the same specifications according to user needs. Material: 304.316.316L stainless steel.

　　Flow rate: 1.1m3/h-600m3/h pressure: 0.28MPa --2.5MPa

　　It is mainly used for large-flow oil transportation and unloading in oil fields, oil depots, ports, terminals, ships, etc.

　　From the outer extension end of the spindle to the pump, it rotates clockwise.

KCB series stainless steel gear pump performance parameters

Type	Flow Q		Rotation n r/min	discharge pressure p Mpa	Necessary steam Margin of erosion r m	effiency η %	motor
	m3/h	L/min					output KW	type
KCB-18.3	1.1	18.3	1400	1.45	5	44	1.5	Y90L-4
2CY-1.1/1.45
KCB-33.3	2	33.3	1420	1.45	5	44	2.2	Y100L1-4
2CY-2/1.45
KCB-55	3.3	55	1400	0.33	7	41	1.5	Y90L-4
2CY-3.3/0.33
KCB-83.3	5	83.3	1420	0.33	7	43	2.2	Y100L1-4
2CY-5/0.33
KCB-135	8	135	940	0.33	5	46	2.2	Y112M-6
2CY-8/0.33
KCB-200	12	200	1440	0.33	5	46	4	Y112M-4
2CY-12/0.33
KCB-300	18	300	960	0.36	5	42	5.5	Y132M2-6
2CY-18/0.36
KCB-483.3	29	483.3	1440	0.36	5.5	42	11	Y160M-4
2CY-29/0.36
KCB-633	38	633	970	0.28	6	43	11	Y160L-6
2CY-38/0.28
KCB-960	58	960	1470	0.28	6.5	43	18.5	Y180M-4
2CY-58/0.28
KCB-1200	72	1200	740	0.6	7	43	37	Y280S-8
KCB-1600	95	1600	980				45	Y280S-6
KCB-1800	112	1800	740	0.6	7.5	43	55	Y315S-8
KCB-2500	150	2500	985				75	Y315S-6
KCB-2850	170	2850	740	0.6	8	44	90	Y315L1-8
KCB-3800	230	3800	989				110	Y315L1-6
KCB-4100	245	4100	743	0.6	8	44	132	Y355M1-8
KCB-5400	325	5400	989				160	Y355M1-6
KCB-5600	330	5600	744	0.6	8	44	160	Y355M2-8
KCB-7600	460	7600	989				200	Y355M3-6
KCB-7000	420	7000	744	0.6	8	44	185	Y355L1-8
KCB-9600	570	9600	989				250	Y355L2-6