Product name : CHINA FACTORY WCB TYPE GEAR OIL PUMP, A MINIATURE PORTABLE ENERGY-SAVING LOW-PRESSURE OIL PUMP, MORE SUITABLE FOR OIL ON THE SHAFT OF THE OIL CYLINDER WITHOUT POWER, BUT ALSO SUITABLE FOR OIL REFINERIES, POWER PLANTS, SUBSTATIONS AND OIL DEPOTS
Product No. : 202211094632
Details:
WCB gear pump detailed introduction
Product introduction
WCB type gear oil pump is referred to as wcb gear pump. It belongs to a low-pressure miniature portable energy-saving oil pump with easy maintenance, reliable performance, long service life, simple appearance and reasonable structure. It is more suitable for oil barrels and shaft oils sold by units without power supplies, and it is also suitable for oil refineries, power plants, power stations, substations (rooms) and oil depots. Dilute oil transfer of dilute oil lubrication system.
Main model:
WCB Series Portable Gear Pump Directory:
Model | Size
(mm)
|
Flow
(L/min)
|
Head
(m)
|
Weight
(kg)
|
Power
(w)
|
Voltage
(v)
|
Material |
WCB-30 | 20 | 30 | 30 | 12 | 370 | 220/380 | Pump body: cast iron, stainless steel 304;
Gear: copper teeth, 304 stainless steel teeth.
|
WCB-50 | 20 | 50 | 30 | 14 | 550 | 220/380 | |
WCB-75 | 25 | 75 | 30 | 16 | 750 | 220/380 | |
WCB-100 | 32 | 100 | 30 | 17 | 1100 | 220/380 |
WCB type gear oil pump product features:
1. Easy maintenance and reliable performance.
2. Long service life and simple appearance.
3. The structure is reasonable and meets the standards of our country.
4. The conveying liquid shall not contain solid particles.
5. The conveying temperature is not higher than 80℃.
Scope of application of WCB type gear oil pump:
WCB type gear oil pump can transport clean neutral oils (such as motor oil, kerosene, diesel and other minerals and various vegetable oils) with a viscosity of 1-8°E from one container to another. It can improve work efficiency and reduce labor intensity. Therefore, it is suitable for commercial, industrial, agricultural and other industries for oil transportation.
Preparation before the WCB gear oil pump is not started
1; Check that each fastener rotates flexibly and has no blocking phenomenon.
2; Check whether the oil pump is rotating.
3; Whether the power supply part is normal.
4; Whether the joints of the inlet and outlet pipes are tightened, and whether the oil absorption height and head exceed the prescribed requirements.
5; When the oil inlet pipe is inserted into the oil barrel, the nozzle must not be higher than the oil surface to prevent air from entering.
Maintenance of WCB gear oil pump during work
1; Check whether there is fever in all parts of the oil pump.
2; When faults such as abnormal noise or high heat generation are found in the oil pump, the oil pump should be stopped immediately and the fault should be eliminated.
3; Pay attention to whether there is oil leakage at the oil seal, and if there is oil leakage, check whether the oil seal is worn or whether the spring is too loose.
4: Always keep the oil pump and work site clean.
Related Products: