CHINA FACTORY DBY TYPE ELECTRIC DIAPHRAGM PUMP, CHEMICAL PUMP, USED FOR VARIOUS HIGHLY TOXIC, FLAMMABLE AND VOLATILE LIQUIDS

Product name : CHINA FACTORY DBY TYPE ELECTRIC DIAPHRAGM PUMP, CHEMICAL PUMP, USED FOR VARIOUS HIGHLY TOXIC, FLAMMABLE AND VOLATILE LIQUIDS

Product No. : 20223716651

←[Previous Product] [Next Product]→

Online Inquiry

Email Us

Details:

1. Product overview：

　　DBY type electric diaphragm pump is a new type of pump. In recent years, due to breakthroughs in diaphragm material, more and more industrialized countries have adopted this type of pump to replace some centrifugal pumps and screw pumps. It is used in petrochemical, ceramics, metallurgy and other industries. The product design refers to the prototype of ABEL Company in the United States. The pump is suitable for low pressure, that is, where the outlet pressure is ≤3kgf/cm2. Occasions.

2. Product features：

　　1. DBY type electric diaphragm pump does not need to be filled with water, and has a self-priming capacity of more than 7 meters.

　　2. Good passing performance, particles, mud, etc. with a diameter of less than 10 mm can pass effortlessly.

　　3. Since the diaphragm will be separated from the conveying medium and the transmission machinery, the medium will never leak outwards; and the pump itself has no shaft seal, and its service life is greatly extended; according to different media, the diaphragm can be divided into neoprene, fluororubber, nitrile rubber, polytetrafluoroethylene, teflon (F46), etc., which can meet the requirements of different customers.

　　4. The overcurrent part of the pump body medium can be divided into cast iron, stainless steel, rubber lining, and aluminum alloy according to different user requirements. The motors can be divided into ordinary motors, explosion-proof motors, geared motors, and electromagnetic speed regulating motors.

3. Product use：

　　1. DBY type electric diaphragm pumps are used for various highly toxic, flammable and volatile liquids.

　　2. Various strong acids, alkalis, and corrosive liquids.

　　3. It can transport media with a higher temperature of 150℃.

　　4. As a pre-stage pressure feeding device for various filter presses.

　　5. Hot water recovery and circulation.

　　6. Loading and unloading of oil tankers, oil depots, and oil products.

　　7. Pump kimchi, jam, mashed potatoes, chocolate, etc.

　　8. Pump to absorb paint, gum, and pigment adhesives.

　　9. All kinds of porcelain glaze, cement, grouting, mortar, mud.

　　10. Various rubber pastes, latex, organic solvents, and fillers.

　　11. Use a pump to clear the warehouse for tankers and barges to absorb sewage and residual oil from the warehouse.

　　12. Hops, baking powder, syrup, and molasses.

　　13. Pump sewage and sediments from mines, tunnels, tunnels, and sewers.

　　14. Suction of various special media.

Fourth, the significance of the model：

　　DBY type electric diaphragm pump

　　For example: DBY-40

　　DBY-electric diaphragm pump

　　40-inlet and outlet diameter (mm)

(mm)

Type	Flow Q (m3/h)	Head H (m)	Suction (m)		Maximum allowable	Through particles	motor output (Kw)
DBY-10	0.5	30	3	1	0.37
DBY-15	1	30	3	1	0.5
DBY-25	3.5	30	7	2.5	1.5
DBY-32	4	30	7	3.5	1.5
DBY-40	5.5	30	7	4.5	1.5
DBY-50	8.5	30	7	8	2.2
DBY-65	10	30	7	8	2.2
DBY-80	14	30	7	10	4
DBY-100	16	30	7	10	4
Note: The diaphragm pump materials are cast iron, stainless steel, aluminum alloy, and lining F46; the diaphragm materials are nitrile, neoprene, fluororubber, and tetrafluoroethylene F46.