Product name : CHINA FACTORY W SERIES CAST IRON HYDRAULIC INJECTOR. HYDRAULIC INJECTOR, VACUUM, CONDENSING, DRAINAGE. HYDRAULIC INJECTOR CHINA SUPPLIER,FACTORY AND MANUFACTURER.
Product No. : 2022414144414
Details:
Overview of W Series Carbon Steel Hydraulic Jets
The hydraulic ejector is a mechanical device with three effective functions, such as vacuuming, condensation and drainage. It uses a certain pressure of water flow to spray through nozzles symmetrically and evenly distributed into a certain inclination, and converges on a focus. Due to the high speed of the jet water flow, a negative pressure is formed around to generate a vacuum in the chamber. In addition, due to the direct contact between the secondary steam and the jet water flow for heat exchange, most of the steam is condensed into water and a small amount of uncondensed steam. The non-condensable gas is also rubbed with the high-speed jet of water, mixed and squeezed, and is discharged through the diffuser tube, so that a higher vacuum is formed in the chamber. Hydraulic ejectors are widely used, mainly used in vacuum and evaporation systems for vacuum pumping, vacuum evaporation, vacuum filtration, vacuum crystallization, drying, deodorization and other processes. , fermentation and some equipment widely needed by light industry and defense sector. But at present, the factory producing hydraulic jets is small and the varieties are not complete. Therefore, our unit has continuously improved the design in recent years. It adopts multi-nozzle and steam ring (guide plate) and other structures, and uses multi-stage pump to feed water. It is installed at a low position and only needs to be installed at a height of 4.5 meters, which improves and improves its working performance. It has a certain advanced nature and is a vacuum condensation equipment. an innovation. Our company specially made stainless steel hydraulic ejector according to the needs of users. It is a kind of high-strength acid-resistant, anti-corrosion and vacuum equipment, especially for chemical and pharmaceutical factories. It is very popular among users all over the world.
Technical parameters of W series carbon steel hydraulic injector
model | Evaporation liters/hour | Vacuum degree mm Pump column (Mpa) | Nozzle (only) | Head (m) | Flow (m3/h) | Matching multi-stage centrifugal pump |
W-100 | 100 | 680-720 | 3 | 45 | 18 | 50D8×5 |
W-200 | 200 | 680-720 | 3 | 45 | 18 | 50D8×5 |
W-300 | 300 | 680-720 | 3 | 45 | 18 | 50D8×5 |
W-400 | 400 | 680-720 | 4 | 45 | 18 | 508×6 |
W-500 | 500 | 680-720 | 4 | 45 | 32 | 80D12×4 |
W-600 | 600 | 680-720 | 7 | 45 | 32 | 80D12×4 |
W-700 | 700 | 680-720 | 7 | 45 | 32 | 80D12×4 |
W-800 | 800 | 680-720 | 7 | 45 | 32 | 80D12×5 |
W-900 | 900 | 680-720 | 6 | 50 | 32 | 80D12×5 |
W-1000 | 1000 | 680-720 | 6 | 50 | 32 | 80D12×5 |
W-1200 | 1200 | 680-680 | 6 | 50 | 32 | 80D12×6 |
W-1500 | 1500 | 680-680 | 7 | 50 | 108 | 125D25×2 |
W-1800 | 1800 | 680-680 | 7 | 50 | 108 | 125D25×2 |
W-2000 | 2000 | 680-680 | 7 | 50 | 108 | 125D25×2 |
W-2500 | 2500 | 680-680 | 7 | 50 | 108 | 125D25×3 |
W-3000 | 3000 | 680-680 | 12 | 50 | 108 | 125D25×4 |
Related Products:
none