Product name : CHINA FACTORY YCB-G SERIES HEAVY OIL GEAR PUMP WITH THERMAL INSULATION FOR HEAVY OIL INDUSTRY, ASPHALT CONCRETE INDUSTRY, RESIN INDUSTRY, DETERGENT INDUSTRY, ADHESIVE INDUSTRY
Product No. : 202242194011
Details:
Brief Introduction
This series of heat insulating gear pump is used to transfer different medium, such as heavy oil,asphalt,resin, detergent and glue, which not includes solid particles and the temperature not higher than300ºC, with solidifying character under the normal temperature. It also applies to the site with heat insulated requirement in the process technology and outdoors installation at very cold area.
This series of heat insulating gear pump belongs to external gear pump. The tooth form is composite formed by arc and sine Cutve. It could transfer many kinds of medium with steady output flow and pressure. There are heat insulating jacket and inlet and outlet joints, on the pump casing, so it could adpot the water to heat,keep warm and cooling the transferred medium and pump. When the viscosity of transferred medium is large than 1500cat,speed should be reduced.
Shaft seal has axial sealing function for the input shaft end of pump. There is shaft packing room on the front cover of pump. It could be equipped with mechanical seal or packing.
This series of heat insulating gear pump is used to transfer different medium, such as heavy oil,asphalt,resin, detergent and glue, which not includes solid particles and the temperature not higher than300ºC, with solidifying character under the normal temperature. It also applies to the site with heat insulated requirement in the process technology and outdoors installation at very cold area.
This series of heat insulating gear pump belongs to external gear pump. The tooth form is composite formed by arc and sine Cutve. It could transfer many kinds of medium with steady output flow and pressure. There are heat insulating jacket and inlet and outlet joints, on the pump casing, so it could adpot the water to heat,keep warm and cooling the transferred medium and pump. When the viscosity of transferred medium is large than 1500cat,speed should be reduced.
Shaft seal has axial sealing function for the input shaft end of pump. There is shaft packing room on the front cover of pump. It could be equipped with mechanical seal or packing.
Model | Port (mm) | Capacity (m3/h) | Different Pressure (Mpa) |
Speed (r/min) | Motor Power (KW) |
YCB0.6-0.6G | 25 | 0.6 | 0.6 | 910 | 0.75 |
YCB1.6-0.6G | 32 | 1.6 | 910 | 0.75 | |
YCB3.3-0.6G | 40 | 3.3 | 940 | 1.5 | |
YCB4-0.6G | 50 | 4 | 940 | 1.5 | |
YCB8-0.6G | 65 | 8 | 960 | 3 | |
YCB10-0.6G | 65 | 10 | 970 | 4 | |
YCB20-0.6G | 80 | 20 | 970 | 7.5 | |
YCB25-0.6G | 80 | 25 | 970 | 11 | |
YCB30-0.6G | 100 | 30 | 970 | 11 | |
YCB40-0.6G | 125 | 40 | 970 | 15 | |
YCB50-0.6G | 125 | 50 | 970 | 22 |
Related Products: