CHINA FACTORY SY,ST SERIES PORTABLE MANUAL SUCTION HAND PUMP,HAND OPERATE OIL LUBRICATION PUMP,PORTABLE MANUAL FUEL PUMP

Product name : CHINA FACTORY SY,ST SERIES PORTABLE MANUAL SUCTION HAND PUMP,HAND OPERATE OIL LUBRICATION PUMP,PORTABLE MANUAL FUEL PUMP

Product No. : 20225693156

[Next Product]→

Online Inquiry

Email Us

Details:

Usage:

this type of hand pump suitable for pumping oil, all kinds of lubricating oil, diesel, kerosene, oil and other oil: this machine is a new type of good performance of small size, convenient and has a filter unit.

Data sheet:

model	SY-25	SY-32
Suction(m)	1.5	1.5
Head(m)	5	5
Capacity(L/MIN)	22	22
Speed(R/MIN)	70	70
Material	Cast iron	Cast iron/Aluminum alloy/stainless steel
Diameter	25mm	32mm inlet/25mm outlet

Hand pump use notice:
1, install the flowline, should be coated with a little oil in thread or sealing tape, again into the pump body, strengthen the seal.
2, before you use to pour a small amount of oil pump, lubrication, turn the crank, after oil.
3, after use should add a small amount of lubricating oil, lubrication.

Details of aluminum alloy hand oil pump

The aluminum-titanium alloy hand-operated oil pump reciprocates through the handle, which is the pressure to open the emergency shut-off valve, and the medium can pass through. In case of fire or other emergencies, the pressure relief valve of the hand-operated oil pump is opened, and the oil pressure system is released. , so that the emergency shut-off valve is closed immediately, or when the temperature rises above 75 °C, the fusible plug installed in the oil pump or emergency shut-off valve will melt immediately to achieve the purpose of automatic pressure relief, and the emergency shut-off valve will automatically close. This product has the characteristics of light weight, easy oil suction, easy installation and operation and so on. The hand oil pump is suitable for pumping various oils such as gasoline, engine oil, kerosene, diesel oil, cooking oil, etc.

Precautions for use:

1. This product cannot be used for liquids that are corrosive to metals

2. When installing, apply a little magnetic oil to the pipe thread and tighten it to keep the seal

3. Pour a small amount of oil into the pump before use to lubricate, then turn the shaker to pump the oil

4. Add a small amount of lubricating oil to the pump after use.

Specifications / Models	ST-25	Round ST-25	Square ST-25
Suction lift ( m )	1.5	1.5	1.5
Head ( m )	5	5	5
Flow ( L / min )	twenty two	twenty two	14
number of revolutions	70	70	70
Weight ( kg )	4.7	3.7	3.5
Overall length ( m )	1.3	1.3	1.25