Our producer of electric motor is top quality three for medium and small electric motor in China and products have been exported to world areas Europe, America, Africa, Southeast Asia for years.
The voltage ranges from 380 to 10kv, and the power ranges from 110kw to 6,000kw.
We can provide:
1. Series low voltage three asynchronous motors
2. Series pole changing multi speed low voltage three phase asynchronous motors
3. Series medium sized high voltage three phase asynchronous motors
4. series medium sized 10kv high voltage three asynchronous motors(450-63- 1-kv)
5. Series medium sized high voltage vertical type three asynchronous motors(355-630 6kv and 450-630 10kv)
6.Lower voltage series variable frequency regulating speed three phase asynchronous induction motors (up to 10kv)
7. Series compact type three phase cage induction motors (355-560, 450-560, 10kv)
8. Series of high voltage three phase asynchronous motor for coal grinder, air blower, and water pump
9. Series medium high voltage internal feedback variable speed three phase asynchronous motors up to 10kv
10 Series of large sized high voltage three phase asynchronous motors 6kv, 10kv.
These series motor have advantages of excellent material to be adopted, precise processing, high efficiency, low noise, small liberation and high reliability and convenient for mounting and maintenance.
The power grade, electric property, mounting dimension and tolerance are coincident with China GB755, IEC34-1 and JG/T 10391-2002 etc.
The series of motor can be used for: compressor, ventilator, water pump, cut machine, transporting machine and can be widely used in mining, machine industry, petroleum chemistry industry, power, coal, rolling mill, winder, cracker, belt conveyer.
For more about each type of our motors ,please provide your requirements and we will design and offer to your demands with catalogue.
TFW1500-40/3250 capacity: 2000kw, 150RPM 6000v, Frequency 50hz, Weight: 40ton, length: 3500mm width: 2450mm height: 4000mm
Quotation: FOB China port: 389508.2USD/unit.
Quotation code: 206120130814
For the 6000+transformer, please inform us the exact requirement for the transformer: you need us quote transformer or you need the alternator to be connection with transformer, and input/ouput voltage...
Voltage : 6000 (+)with transformer
Kilowatts : 2000 Kw.
Frequency : 50 Hz
Technical specification and offer for the low speed 2500kw DC Motor
|
For the DC motor, our producer is under Harbin, and China’s largest supplier to Military, power, perto, railway, steel, nuclear industries, with almost 60 years experience, reference around the world, technology at world level, equipments are most advanced from China and the world.
So it is far more than required qualification for your 2500kw DC motor.Technical specification for the quoted 2500kw DC Motor
1 motor type and specification
Model: Z1000-5
Rated power: 2500kW
Rated voltage: 850V
Rated speed: 350/700r/min
Rated current: 3130A
Efficiency: 94%
Excitation way: excited
Excitation voltage: 220/110V
2 technical requirements
2.1 work system: S1
2.2 cooling: ICW37A86
2.3 protection degree: IP44
2.4 insulation class: f (b-class assessment)
2.5 installation: IM1001
2.6 motor suitable for static rectifying power supply power supply, its rectifier Pulse Rate should not be less than 6, at the rated speed and rated armature voltage and phase factor under rated load should not be less than 85%, peak ripple factor of the power supply does not exceed 6%.
2.7 current change rate (di/dt) allows to achieve 200IN/s.
2.8 motor allows the rated voltage and the rated speed range, continuous operation with 115% rated load. Under this load, low temperature and high, other characteristics may differ from the ratings that run under rated conditions.
2.9 after running short-time overload, the motor must be light load running, to keep the motor under load as a whole load of root-mean-square value for a specified period not exceeding the continuous rating.
2.1 motor to spin for both sides.
3 motor main structure
3.1 uses the f class insulation. Stator, rotor f-grade solvent-free vacuum pressure integral impregnation (VPI).
3.2 welding between winding and commutator of armature winding and riser weld all use silver brazing.
3.3 motor adopts concentric compensating winding.
3.4 commutator trapezoidal copper using AG-CU alloy.
3.5 armature-free wedge structure.
3.6 motor shaft extension using a cylindrical key connection type.
3.7 used constant pressure of motor brush brush.
4 other
4.1 electrical outlet box on the right side viewed from the drive-end.
4.2 motor cooler, cooler water from the motor drive end on the left. Cooler supplied together with the motor body.
4.3 motor adopts imported bearing.
Pt100 temperature components laid 4.4 motor stator 4, planted 1 Pt100 temperature components bearing at each end.
5 implementation of the standards
5.1 motor conform to GB755-2000 and JB/T9577-1999 of the scale and performance of rotating electrical machines of the z series medium sized DC motors technical specifications.
5.2 motor noise does not exceed the GB/T10069.3 provisions of the maximum allowable value.
5.3 motor vibration does not exceed the GB/T10068.2 provisions of the maximum allowable value.Quotation:
DC MOTOR 2500kw, 850v 350 to 700 rpm Unit Price: $194,672.00 (EXW China)
Quotation code: Echo industrial 1762520130807
Here are some of the recent reference:
1. Motor for Nuclear power project
2. Pumps for Nuclear power project
3. Horizontal circulation pumps, condensing motor
4. Motor for pumps station
5. Frequency adjustable motor large Steel Mills
6. Large Size DC Motor for Large Steel mills
|
Chinese
Deutsch
Espanol
Francais
Italiano
Portugues
Japanese
Korean
Arabic
Russian