Product name : CHINA FACTORY HEAT OIL CIRCULATION PUMP RY HIGH TEMPERATURE AIR-COOLED BOILER 350 DEGREE HEAT OIL PUMP PIPELINE PUMP,PUMPING STATION RY32-32-160 6 M3/H WITH 4 KW 3000 RPM ENGINE
Product No. : 20231121152438
Details:
Product details
RY series thermal oil pump The pump has a reasonable structure, excellent performance and reliable use. It is suitable for conveying high-temperature liquids that do not contain solid particles. Its degree of corrosion resistance and operating temperature depend on the material of the main parts in contact with the medium (divided into three categories: 1. HT200; II. ZG230-450; III.1Cr18Ni9Ti, OCr18Ni12-Mo2Ti)
RY thermal oil pump scope of application RY series thermal oil pump
1. Petroleum and chemical industry
2. Grease industry
3. Synthetic fiber industry
4. Textile printing and dyeing industry
5. Plastics and rubber industry
6. Paper industry
7. Timber industry
8. Construction industry
In addition, the RY series thermal oil pumps are also widely used in the machinery industry, food industry, pharmaceutical production, hot oil furnace oil supply circulation system, and hot oil heating circulation system.
RY thermal oil pump performance range (according to design point)
1. Flow rate 1-500m3/h;
2. Head 10-125m;
3. Temperature -20ºC; -350ºC.
The RY series thermal oil pump has been repeatedly designed and improved by the technical department of our company. Through practical experiments, it has been proved that the new generation of RY series thermal oil pumps of our company can eliminate the leakage of media under normal use!Especially for media with strong permeability, such as media similar to carbon nine oil, etc.
Introduction to the structure of RY thermal oil pump
The RY type hot oil pump is a single-stage cantilever structure divided into foot support and support. The inlet of the pump is axial suction and the outlet is vertically upward.The pump and the drive motor are combined on the same base through an elastic coupling.The entire unit does not require a cooling system.
RY series thermal oil pumps are mainly composed of housing, rotor, bearing, sealing and other parts. They adopt a packing sealing structure and an additional temperature-resistant oil seal to assist in sealing.The pump and the motor are connected by a three-jaw elastic coupling.
RY series thermal oil pump The design of the pump changes the traditional thermal oil pump structure, adopts a natural heat dissipation cooling method, reduces the volume of the pump, makes the structure simple, saves operating costs, and is reliable.
Related Products: