CHINA FACTORYZS TYPE STAINLESS STEEL HORIZONTAL SINGLE-STAGE CENTRIFUGAL PUMP. ZS SERIES CHEMICAL CENTRIFUGAL PUMP CHINA SUPPLIER, FACTORY AND MANUFACTURER

ZS type stainless steel horizontal single-stage centrifugal pump is made of advanced technology such as stainless steel plate stamping and bulging welding . It has the characteristics of beautiful appearance, light structure, high efficiency and energy saving, durable and light corrosion resistance, low noise and so on.

ZS stainless steel horizontal single-stage centrifugal pump is a multi-functional product with a wide range of adaptability. It can transport various media including water or industrial liquids, and is suitable for different temperature, flow and pressure ranges. Its typical applications mainly include the following aspects:

Water supply: water plant filtration, transmission and zonal water supply and main booster;

Industrial booster: process water system, cleaning system;

Industrial liquid transportation: boiler feed water, condensing system, cooling and air conditioning system, machine tool matching, acid and alkali transportation;

Water treatment: distillation systems or separators, swimming pools, etc.;

Irrigation of farmland, petrochemical industry, medicine and health, etc.

ZS stainless steel horizontal single-stage centrifugal pump is a direct-connected pump shaft, which consists of a pump, a pump shaft and a standard motor:

1) The pump should be installed in a ventilated and freeze-proof place;

2) The installation of the pump should ensure that the pump is not affected by the tension of the system pipeline during use;

3) If the pump is installed outdoors, a suitable cover must be configured to prevent water or condensation from entering the electrical components;

4) In order to facilitate inspection and maintenance, there should be enough space around the unit;

5) The electrical wiring device should ensure that the pump is not damaged by phase loss, voltage instability, leakage and overload;

6) The pump should be installed horizontally on the base, the horizontal direction is the pump's suction port, and the vertical direction is the pump's discharge port.

Clean, thin, non-flammable and explosive liquids that do not contain solid particles and fibers;

Liquids with a temperature between -20°C and +100°C;

High ambient temperature +40℃;

High altitude of 1000 meters;

System high pressure 10bar.

The motor is a fully enclosed, air-cooled two-pole standard motor;

Protection class: IP55;

Insulation class: F;

Standard voltage: 50Hz 1×220V 3×380V